S Scale Curved RR Crossing for Lionel(American Flyer) 27R 2-rail Fastrack system

Description

Railroad Crossing (MRGS8127) for Lionel (American Flyer) S scale (1:64) 2-rail Curved Fastrack, sectional track (ramps(MRGS-8127Ramp) available separately, see other auction) buy them together for combined shipping.
Laser Cut/Engraved Wood Plank Railroad Grade Crossing kit (MRGS-8127) this is the
crossing only
for
27"radius curved track,
Ramps are a separate kit (MRGS-8127Ramp) now available, see other auction and additional photos. Curved. Cut planks, engraved nail/bolt detail. Specifically designed for LIONEL(R) S American Flyer Fastrack. However, should fit any similar "S" Gauge (1:64 or 3/16 scale) 2 rail track curved 27"radius section with 0.148" rail height. 4.6" long or 25.5 scale ft. Wide enough for two traffic lanes. Shims included to raise center to track bolt level and position top boards below rails so not to obstruct power pickup (wheel
contact)
. To install on flex track carefully curve track to fit crossing and adjust to insure flange space is proper.
Allows for proper wheel flange clearance. Laser cut to proper fit on all rails. Easy installation, length adjusted to fit with tie spacing, nail detail will line up with ties when crossing end is placed with end aligned with edge of tie. Ready to weather to your satisfaction. Real Railroad Prototypical Appearance. Stain or color to your choice or leave natural when installed. See photos of installations.  Covers ties and provides an edge to stop scenery, road surface without fouling track. Installs easily with any type of glue, following instruction on header card. You must add ramps
(see our NEW product listing for these)
or other scenic road way to each side of the crossing.
These crossings may be used in any S Scale Standard Gauge (Narrow Gauge to follow) application, the crossing is laser cut to clear wheel flanges and may be use with any rail from .090 to .148+ in height. Shim provided (0.040) will provide a total crossing height of 0.130+ and clear any rolling stock operated on 0.148 rail. Use the crossing itself with any thickness shim for other rail height from 0.090 up. For scale code 100 rail, just don't use the shims. Bottom edges of crossing may need to be sanded back to clear spikes and tie plates.
Material provided makes one (1) grade crossing (single track) with 2 roadway (auto) lanes. We make other S scale crossings and O Scale crossings for the LIONEL (R) Fastrack system and ramps for all. Custom work can be done for special installations.
Multiple purchases are fine, mix or match style/radius OK, shipping will calculate accordingly. Thanks for your order. Check my other items & auctions for bulk packages and other radius or straight crossings, order extras and save on freight cost.
Thanks for your interest.
Payment & Shipping Information:
I do combine items to save you on shipping charges. When you fill out my automatic checkout, your reduced charges will automatically be computed.
Shipping for international orders will also be determined after the close of the auction and will be First Class mail unless requested otherwise, Please NOTE eBay defaults to Global Shipping Program. We must be notified by buyer (YOU) prior to checking out (so we can send you an alternate invoice) if alternative shipping is desired.  Remember VAT is paid by customer not seller.
We prefer PayPal Payments.
Thank you for your interest & please refer us to your Facebook friends after you purchase from us. Check our page and leave us a Like, Thank You.